Food Court Payment Terminal Board, WF-SPT-07, AndroidSBC, Dhaka

TL;DR: Food Court Payment Terminal Board

AndroidSBC manufacturer capacity statement from the smart payment terminal production base serving Dhaka, Bangladesh. The WF-SPT-07 smart payment terminal Android motherboard covers the legacy Android 11 payment terminal build and eleven sister configurations in the WF-SPT series, spanning the RK3288 quad-core ARM Cortex-A17 1.8GHz SoC with the ARM Mali-T764 GPU, 5.5-inch 720x1280 LVDS capacitive touch panel, and Android 11 with AOSP baseline firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-SPT family from the Longgang source factory in Shenzhen to Dhaka and Bangladesh importers who build countertop payment terminals, self-service kiosks, unattended vending and locker machines, transit ticketing gates and outdoor charging pillars.

About AndroidSBC and the Smart Payment Terminal Android Motherboard Family

AndroidSBC is the export brand of Wanlin Manufacturing Group, a Shenzhen source-factory group that has spent more than a decade on Rockchip and Allwinner payment hardware. The smart payment terminal Android motherboard family covered in this release is the WF-SPT line, twelve configurations built around one peripheral contract so a Dhaka integrator can qualify a printer, a reader and a scan engine once and then move across the whole range. Firmware is treated as a managed asset on this family. Bangladesh estates receive staged OTA groups with rollback, signed images and a published maintenance window, so a Dhaka operations team can schedule an update rather than react to one.

WF-SPT-07 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-07 (legacy Android 11 payment terminal build) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Bangladesh importers sourcing the WF-SPT family, the WF-SPT-07-A variant is the typical configuration for the replacement board for an installed terminal estate use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Payment Terminal Android Motherboards for Bangladesh Buyers

Most Dhaka programmes are multi-format from the start: one countertop build for staffed lanes, one unattended build for kiosks, one outdoor build for forecourts. Buying those from three suppliers means three Android baselines and three sets of spare parts.

The second problem is paperwork. A Bangladesh shipment needs BTRC type approval with BSTI import conformity documentation that matches the actual configuration on the pallet, not a generic file copied from an older lot, and the Dhaka customs broker is the one who pays when it does not. What Dhaka integrators get is a board that repeats: 174900 units now, 174900 more next quarter, the same connector map, the same printer pinout, the same Android baseline, all moving on the Chittagong - Singapore lane into Bangladesh.

Competitive Comparison: WF-SPT-07 vs Competing Smart Payment Terminal Motherboards

For Dhaka buyers the honest comparison is total cost of integration, not unit price. A cheaper board without a printer profile, a scan mapping or an OTA path costs more by the time the estate is live in Bangladesh.

• vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
• vs single-configuration boards: twelve configurations share one peripheral contract, so a Dhaka buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
• vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the Bangladesh integrator to manage it.
• vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in Dhaka is the board that ships in volume.

Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends

Demand in Bangladesh is moving toward unattended and self-service formats, and that shift changes what an legacy Android 11 payment terminal build has to prove: an offline transaction buffer, a watchdog that recovers without a human, and a printer that survives a roll of receipts per day in Dhaka.

• Countertop tier: WF-SPT-01 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
• Unattended tier: WF-SPT-03 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
• Flagship tier: WF-SPT-05 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.

For Dhaka buyers the reading is straightforward: the growth is in formats, not in replacements, so the board that wins is the one that can be qualified once and then repeated across a Bangladesh estate.

Partner Success Story: Meridian Retail Systems (convenience store payment integrator)

When Meridian Retail Systems reviewed the EMEA convenience retail market, the shortlist came down to whether a supplier would hold a configuration for the length of the agreement. Meridian Retail Systems rolled out 174900 WF-SPT boards across 62 convenience stores.

• OEM relationship: AndroidSBC private-label SKU shipped with Meridian Retail Systems branding and CE / FCC / RoHS files bundled.
• Silicon choice: Rockchip RK3568, RK3566, RK3576, RK3288 and RK3399 plus Allwinner A133, A64, H618 and T527 across twelve configurations, one fixed bill of materials per production lot.
• Payment peripheral package: bundled into the source-factory shipment, covering NFC contactless, IC card, magnetic stripe, thermal printer control, 1D and 2D scan engine, signature capture and the LTE modem band list.
• Unattended-operation tools: hardware watchdog, RTC, auto power-on after mains return, scheduled power cycling, kiosk-mode lockdown, offline transaction buffer and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus BTRC conformity, all bundled into the Shenzhen source-factory shipment.

Meridian Retail Systems Head of Store Technology for EMEA Convenience Retail: "Meridian Retail Systems standardised on the smart payment terminal board so one Android image runs the whole estate, with 174900 units released into the Dhaka store network in the first wave."

Field Report: estate replacement programme for an installed terminal base

LONGGANG, September 30, 2026 - Deng Hui, AndroidSBC field desk. The WF-SPT-07 configuration was built for the legacy Android 11 payment terminal build use case, and the Bangladesh team ran the acceptance test with the same printer mechanism and reader antenna the integrator will install. The WF-SPT-07 payment terminal board order for Dhaka, Bangladesh cleared the burn-in station on schedule and is en route via the Chittagong - Singapore lane.

The WF-SPT-07 legacy Android 11 payment terminal build production lot includes the WF-SPT-07-A variant as the typical configuration, with printer current profile, scan engine mapping and staged OTA management bundled into the source-factory shipment. For Bangladesh integrators, the BTRC type approval with BSTI import conformity paperwork is bundled.

Filed by Deng Hui, AndroidSBC field desk, LONGGANG. Bangladeshi programmes grow through micro merchant formats, so the value configuration carries most of the volume.

WF-SPT-07 Application Scenarios

The WF-SPT-07 legacy Android 11 payment terminal build sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-07-A configuration is the typical build for the replacement board for an installed terminal estate use case, with printer current profile, scan engine mapping and staged OTA management bundled.

• Convenience and grocery counters: the WF-SPT-07 takes contactless, IC card and QR at the till and prints the receipt in one pass.
• Restaurant and quick-service counters: the WF-SPT-05 runs order entry, payment and kitchen ticket printing on the same board.
• Unattended vending and lockers: the WF-SPT-08 pairs the modem with the printer header and the watchdog for sites with no staff present.
• EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
• Transit gates and event entry: the WF-SPT-03 takes contactless payment and prints the entry ticket without a fixed counter.
• Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
• Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
• Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
• Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.

Partnership Models for Dhaka Buyers

For Dhaka partners the choice is between stocking the board, integrating the board or branding the board, and each track carries a different level of engineering support.

• Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.

All three tracks ship from the same source factory with the same compliance file, which is why Dhaka partners can move between them as a Bangladesh programme grows.

Frequently Asked Questions

Does the smart payment terminal board family support a legacy 11 payment terminal build?

Answer: Yes. The legacy 11 payment terminal build ships as a standard configuration, qualified on the Longgang bench with the printer mechanism, the reader antenna and the scan engine that the Dhaka integrator will install.

Which configurations are available in the WF-SPT family for Bangladesh buyers?

Answer: Twelve configurations span Rockchip RK3288 and the rest of the range: RK3568, RK3566, RK3576, RK3288 and RK3399 plus Allwinner A133, A64, H618 and T527, all on one peripheral contract.

Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?

Answer: Yes. One WF-SPT board drives the touch panel, the thermal printer and the scan engine simultaneously, and the current budget for all three is measured on the bench and written into the shipment file.

What payment scheme certification support does AndroidSBC provide for Bangladesh?

Answer: The compliance file for Bangladesh covers BTRC type approval with BSTI import conformity testing and BTRC conformity, issued against the exact configuration that ships to Dhaka rather than a generic family file.

What is the minimum order quantity and the sample lead time for Bangladesh?

Answer: The minimum for a customised build is higher than for a stock configuration, but a Dhaka buyer can start with a sample lot, qualify it on the bench, and then move to a production slot without re-qualification.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. The engineering team supports driver development, API integration, locale packs and application pre-install, and the resulting image is signed and staged into OTA groups for Dhaka.

How are firmware updates delivered to a Bangladesh device estate after deployment?

Answer: Firmware is delivered as signed images through staged OTA groups with rollback, so a Bangladesh estate can be updated in waves rather than all at once, with a published maintenance window.

What shipping terms does AndroidSBC support for Bangladesh orders?

Answer: AndroidSBC supports EXW, FOB, CIF and DAP, quotes Port of Chittagong as the default port for Bangladesh, and prepares the customs file before the container closes for Dhaka.

Contact AndroidSBC: Start Your WF-SPT-07 Sourcing Conversation

Every Dhaka programme starts the same way at AndroidSBC: the format, the peripherals, the certification calendar, then a quotation that holds the configuration for the term.

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

OEM, ODM and private-label tracks are open for Bangladesh. AndroidSBC supplies the board, the firmware, the documentation and the qualification support, and Dhaka partners own the channel.