PCI Compliant Payment Terminal Board with 6-Inch Display, WF-SPT-10, AndroidSBC, Dhaka

TL;DR: PCI Compliant Payment Terminal Board with 6-Inch Display

AndroidSBC export compliance briefing covering the smart payment terminal board family serving Dhaka, Bangladesh. The WF-SPT-10 smart payment terminal Android motherboard covers the octa-core Android 13 hospitality payment terminal build and eleven sister configurations in the WF-SPT series, spanning the T527 octa-core ARM Cortex-A55 1.8GHz SoC with the ARM Mali-G57 MC1 GPU, 6-inch 1080x1920 MIPI DSI capacitive touch panel, and Android 13 with AOSP baseline and optional GMS firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-SPT family from the Longgang source factory in Shenzhen to Dhaka and Bangladesh importers who build countertop payment terminals, self-service kiosks, unattended vending and locker machines, transit ticketing gates and outdoor charging pillars.

About AndroidSBC and the Smart Payment Terminal Android Motherboard Family

The WF-SPT line exists because payment hardware buyers in Bangladesh rarely want a new board design - they want the same board with a different modem, a different panel and a different certification file. AndroidSBC holds those variables inside one family, and the Dhaka buyer picks the configuration rather than commissioning a new PCB. AndroidSBC holds a fixed bill of materials per production lot, which is the part Dhaka buyers care about most: the board that passed qualification is the board that arrives in volume, twelve months later, on the same peripheral contract.

WF-SPT-10 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-10 (octa-core Android 13 hospitality payment terminal build) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Bangladesh importers sourcing the WF-SPT family, the WF-SPT-10-A variant is the typical configuration for the hotel front desk and resort reception counters use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Payment Terminal Android Motherboards for Bangladesh Buyers

Unattended formats change the failure model completely. A counter in Dhaka has a human to reboot a terminal; a vending machine, a charging pillar or a parking machine does not, so the watchdog, the scheduled power cycle and the offline transaction buffer stop being optional.

Logistics is the third problem. A board that clears Port of Chittagong without a matching test report, a signed firmware image and a packing list keyed to the configuration code will sit in a warehouse while the Dhaka rollout window closes. AndroidSBC answers those problems with the WF-SPT family: twelve configurations, one fixed bill of materials per production lot, the compliance set bundled with the first carton, and a 2nd production slot released this month for Dhaka on the Chittagong - Singapore lane.

Competitive Comparison: WF-SPT-10 vs Competing Smart Payment Terminal Motherboards

AndroidSBC publishes this comparison because Dhaka integrators ask for it: what changes when a payment terminal board is built by a source factory that holds its bill of materials, against one that is re-spun on every order.

• vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
• vs single-configuration boards: twelve configurations share one peripheral contract, so a Dhaka buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
• vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the Bangladesh integrator to manage it.
• vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in Dhaka is the board that ships in volume.

Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends

AndroidSBC reads the Bangladesh market as a documentation market: growth is real, but the programmes go to the supplier whose file clears the acquiring partner first, which is why the octa-core Android 13 hospitality payment terminal build ships with its compliance set rather than after it.

• Countertop tier: WF-SPT-02 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
• Unattended tier: WF-SPT-08 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
• Flagship tier: WF-SPT-11 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.

The trend that matters for Bangladesh is estate size. As terminals multiply per site, remote management stops being a feature and becomes the purchasing criterion, which is where the Dhaka decision is actually made.

Partner Success Story: Meridian Retail Systems (convenience store payment integrator)

The EMEA convenience retail programme run by Meridian Retail Systems started as a sample order and turned into an estate standard once the qualification data came back from Dhaka. Meridian Retail Systems rolled out 96300 WF-SPT boards across 62 convenience stores.

• OEM relationship: AndroidSBC private-label SKU shipped with Meridian Retail Systems branding and CE / FCC / RoHS files bundled.
• Silicon choice: Rockchip RK3568, RK3566, RK3576, RK3288 and RK3399 plus Allwinner A133, A64, H618 and T527 across twelve configurations, one fixed bill of materials per production lot.
• Payment peripheral package: bundled into the source-factory shipment, covering NFC contactless, IC card, magnetic stripe, thermal printer control, 1D and 2D scan engine, signature capture and the LTE modem band list.
• Unattended-operation tools: hardware watchdog, RTC, auto power-on after mains return, scheduled power cycling, kiosk-mode lockdown, offline transaction buffer and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus BTRC conformity, all bundled into the Shenzhen source-factory shipment.

In the words of Meridian Retail Systems Head of Store Technology for EMEA Convenience Retail: "Meridian Retail Systems standardised on the smart payment terminal board so one Android image runs the whole estate, with 96300 units released into the Dhaka store network in the first wave."

Field Report: front desk terminal refresh at a hotel group

PINGHU, September 30, 2026 - Ling Yun, AndroidSBC field desk. The octa-core Android 13 hospitality payment terminal build on the WF-SPT-10 board was validated at the top and the bottom of the temperature window, and the Bangladesh acceptance report records both numbers instead of a single ambient figure. The WF-SPT-10 payment terminal board order for Dhaka, Bangladesh cleared the burn-in station on schedule and is en route via the Chittagong - Singapore lane.

The WF-SPT-10 octa-core Android 13 hospitality payment terminal build production lot includes the WF-SPT-10-A variant as the typical configuration, with printer current profile, scan engine mapping and staged OTA management bundled into the source-factory shipment. For Bangladesh integrators, the BTRC type approval with BSTI import conformity paperwork is bundled.

Filed by Ling Yun, AndroidSBC field desk, PINGHU. Bangladeshi programmes grow through micro merchant formats, so the value configuration carries most of the volume.

WF-SPT-10 Application Scenarios

The WF-SPT-10 octa-core Android 13 hospitality payment terminal build sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-10-A configuration is the typical build for the hotel front desk and resort reception counters use case, with printer current profile, scan engine mapping and staged OTA management bundled.

• Convenience and grocery counters: the WF-SPT-12 takes contactless, IC card and QR at the till and prints the receipt in one pass.
• Restaurant and quick-service counters: the WF-SPT-11 runs order entry, payment and kitchen ticket printing on the same board.
• Unattended vending and lockers: the WF-SPT-08 pairs the modem with the printer header and the watchdog for sites with no staff present.
• EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
• Transit gates and event entry: the WF-SPT-10 takes contactless payment and prints the entry ticket without a fixed counter.
• Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
• Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
• Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
• Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.

Partnership Models for Dhaka Buyers

Dhaka buyers usually land on one of three tracks with AndroidSBC, and the difference between them is how much of the integration the partner wants to own.

• Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.

Every track ends the same way in Bangladesh: the board arrives with its test report, its certificate set and its signed firmware image, whether or not it carries the partner brand in Dhaka.

Frequently Asked Questions

Does the smart payment terminal board family support an octa-core 13 hospitality payment terminal build?

Answer: Yes. The octa-core 13 hospitality payment terminal build is a stock configuration on the smart payment terminal board family from AndroidSBC. All twelve configurations are validated against the same Android build and the same peripheral contract before shipment to Bangladesh.

Which configurations are available in the WF-SPT family for Bangladesh buyers?

Answer: The family spans T527 plus eleven configurations covering countertop, unattended, outdoor, hospitality and multimedia formats, all documented in one delivery file for Dhaka.

Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?

Answer: Yes. A single WF-SPT board handles all three peripherals, and the Dhaka acceptance test is run with the actual printer mechanism and scan engine the project will deploy in Bangladesh.

What payment scheme certification support does AndroidSBC provide for Bangladesh?

Answer: AndroidSBC ships the CE / FCC / RoHS set plus BTRC conformity with every lot, and supports BTRC type approval with BSTI import conformity testing for the Bangladesh configuration through the qualification run at the factory.

What is the minimum order quantity and the sample lead time for Bangladesh?

Answer: Sample orders start at a single configuration and ship in 1-3 days from Shenzhen. Volume pricing begins at 500 boards, and the Dhaka lot is quoted against a published price list.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. Custom ROM, boot logo and pre-install work is scoped as an engineering item and delivered with the board, so the Bangladesh integrator receives a terminal that boots into its own application.

How are firmware updates delivered to a Bangladesh device estate after deployment?

Answer: Staged OTA groups are created during qualification, so the Dhaka estate is never updated in a single wave, and every image carries a signature the terminal verifies before it applies.

What shipping terms does AndroidSBC support for Bangladesh orders?

Answer: Standard terms are FOB Shenzhen and CIF Port of Chittagong, with DAP available for Dhaka programmes where the partner wants a single invoice through to delivery.

Contact AndroidSBC: Start Your WF-SPT-10 Sourcing Conversation

Partners in Dhaka can start with a single sample configuration or with a full estate specification - both routes end at the same production slot and the same compliance file.

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

AndroidSBC is the export arm of Wanlin Manufacturing Group and is recruiting Bangladesh distributors, integrators and brand partners for the smart payment terminal board family. Sample dispatch for Dhaka runs in 1-3 days.