RK3568 Android 11 POS Motherboard for Convenience Store Counter, WF-P3602, AndroidSBC, Dhaka

TL;DR: RK3568 Android 11 POS Motherboard for Convenience Store Counter

AndroidSBC release: twelve-model WF-P POS motherboard family opens for volume orders serving Dhaka, Bangladesh. The WF-P3602 POS Android motherboard spans the mobile handheld POS with 4G and barcode engine and eleven sister models in the WF-P series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, MIPI DSI output at 720p, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Dhaka and Bangladesh importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.

About AndroidSBC and the POS Android Motherboard Family

The WF-P family covers the full span a Dhaka retail group will meet in one refresh cycle: a 2GB entry counter board for small format stores, a 4GB dual-screen tier for restaurants, an 8GB AI tier for face payment, and a wide-temperature industrial tier for unattended cabinets that sit outside. Peripheral validation happens on the Longgang bench with the actual printer, scanner and drawer models the Dhaka integrator intends to use, and the result is written into the shipment file rather than left to the integrator to discover on site.

WF-P3602 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3602 (mobile handheld POS with 4G and barcode engine) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Bangladesh importers sourcing the WF-P family, the WF-P3602-A variant is the typical configuration for the tableside ordering handheld rollout use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing POS Android Motherboards for Bangladesh Buyers

Then there is the fiscal layer. In Bangladesh the receipt has to be produced in a form the tax authority recognises, which means the printer handshake, the log retention and the receipt font set have to be right before the first store opens.

AndroidSBC answers the continuity problem with a frozen bill of materials. Each WF-P production lot is built against a fixed BOM and a fixed silicon tier, and the BTRC documentation records the actual parts used, so the Dhaka partner re-ordering in a year receives a board that behaves the same way. The 2nd release for Dhaka - 16600 units on September 23, 2026, Chittagong - Singapore lane - was built against the same reference image the partner qualified, so the lanes went live without a re-test cycle.

Competitive Comparison: WF-P3602 vs Competing POS Android Boards

Four differences decide whether a Bangladesh POS rollout survives its second year, and they are all visible before the first lane goes live.

• Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
• Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.

Global POS Terminal and Smart Checkout Market Trends

The Bangladesh picture follows the global pattern: cashless adoption sets the demand, and the replacement of legacy registers sets the volume. A Dhaka integrator who can offer a board that drops into an existing enclosure wins on installation cost as much as on unit price.

• Entry counter tier: WF-P3602 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
• Dual-screen mainstream tier: WF-P7601 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
• AI and unattended tier: WF-P7602 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.

The eight-tier WF-P line exists because Dhaka rollouts are not uniform. One chain will use four of the twelve models, and the point is that all four share one driver contract.

Partner Success Story: Rheinland Kassen Systeme (discount chain checkout integrator)

The Rheinland Kassen Systeme rollout in the German discount retail segment shows how the WF-P family from AndroidSBC supports Dhaka integrators. Rheinland Kassen Systeme rolled out 16600 WF-P boards across 132 discount store lanes.

• OEM relationship: AndroidSBC private-label SKU shipped with Rheinland Kassen Systeme branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus BTRC conformity, all bundled into the Shenzhen source-factory shipment.

According to Rheinland Kassen Systeme Head of Checkout Hardware for German Discount Retail: Rheinland Kassen Systeme runs the TSE fiscal export interface on the WF-P board, and 16600 units were accepted into the Dhaka discount group after the bench validation.

Field Report: tableside ordering handheld rollout at a casual dining group

LONGGANG, September 23, 2026 - Heng Yu, AndroidSBC field desk. Thermal behaviour was the last gate: the WF-P3602 finished the burn-in at the top of the temperature window rather than at 25C, which is the condition a sealed counter actually presents. The WF-P3602 POS Android motherboard order for Dhaka, Bangladesh cleared the burn-in station on schedule and is en route via the Chittagong - Singapore lane.

The WF-P3602 mobile handheld POS with 4G and barcode engine production lot includes the WF-P3602-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Bangladesh integrators, the BTRC type approval with BSTI import conformity paperwork is bundled.

Filed by Heng Yu, AndroidSBC field desk, LONGGANG. Bangladesh integrators typically request CE plus local radio interface notification for POS board deployments.

WF-P3602 Application Scenarios

The WF-P3602 mobile handheld POS with 4G and barcode engine sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3602-A configuration is the typical build for the tableside ordering handheld rollout use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.

• Supermarket and hypermarket checkout: the WF-P3602 drives the cashier screen while the second lane carries the customer display or the promotion wall in Dhaka.
• Convenience and small format stores: the WF-P3288 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
• Restaurants and quick service: the WF-P3399 runs the order screen plus a kitchen display output, with the customer display showing the order total.
• Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
• Unattended retail and vending: the WF-P1330 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
• Fuel forecourts and parking: the WF-P6180 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
• Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
• AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
• Retrofit programmes in Dhaka: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.

Partnership Models for Dhaka Buyers

AndroidSBC does not force a track on Bangladesh partners. The three below are the ones that actually get used.

• Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

AndroidSBC is recruiting local partners in Bangladesh on all three tracks, and the qualification evidence needed to start is the same in each case.

Frequently Asked Questions

Does the WF-P POS Android motherboard family support a mobile handheld POS with 4G and barcode engine?

Answer: Yes. AndroidSBC validates mobile handheld POS with 4G and barcode engine on the bench with the actual peripherals the Dhaka partner intends to use, and the result is written into the shipment file.

Which silicon tiers are available in the WF-P family for Bangladesh buyers?

Answer: Available tiers are RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527. AndroidSBC holds one fixed BOM per lot, so the Dhaka partner always knows which tier is shipping.

Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?

Answer: Yes. AndroidSBC validates the exact combination on the Longgang bench using the Dhaka partner printer and scanner models, and the validated configuration is locked as the production reference.

What is the minimum order quantity and the sample lead time for Bangladesh?

Answer: Sample lead is 1-3 days and mass production is 15-30 days. MOQ depends on the track - distribution partners work from the price list, private-label SKUs are agreed per configuration.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. AndroidSBC provides custom Android AOSP builds, custom boot animation and logo, pre-installed apps, custom UI, BSP porting and SDK modules, all built against a frozen BOM.

How are firmware updates delivered to a Bangladesh estate after deployment?

Answer: Firmware is delivered over the network or by USB, with a staged release and a rollback path. AndroidSBC commits to a seven-year update window on the WF-P family.

What shipping terms does AndroidSBC support for Bangladesh orders?

Answer: The export desk quotes FOB Shenzhen, CIF and EXW, handles customs clearance, and ships globally. The Dhaka partner picks the term and AndroidSBC books the lane.

What happens if a board fails in the field in Bangladesh?

Answer: The RMA path uses the board serial number to identify the production lot, then replaces from stock held for the Dhaka programme so the lane is not down for a full lead time.

Contact AndroidSBC: Start Your WF-P3602 Sourcing Conversation

Dhaka integrators can reach the AndroidSBC export desk for the WF-P POS board family through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Bangladesh buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window on the WF-P family.