32GB eMMC Guide Smart Device Board for Dual-Screen Guide, WF-G8801, AndroidSBC, Dhaka

TL;DR: 32GB eMMC Guide Smart Device Board for Dual-Screen Guide

AndroidSBC supply desk: LPDDR4X and eMMC allocations locked for the WF-G guide kiosk board family serving Dhaka, Bangladesh. The WF-G8801 smart guide kiosk Android motherboard spans the AI vision smart guide terminal and eleven sister models in the WF-G series, all built on the RK3588 octa-core ARM Cortex-A76 2.4GHz plus Cortex-A55 64-bit SoC with the ARM Mali-G610 MP4 GPU, dual HDMI 2.1 8K 60fps plus eDP, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Dhaka and Bangladesh importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

The WF-G smart guide kiosk Android motherboard family spans venue types rather than a single product category. AndroidSBC supplies the same twelve-model family into shopping centre floor directories, tenant and product finders, supermarket price check points, pharmacy enquiry counters, airport and transit wayfinding banks, hospital and clinic orientation points, hotel and resort lobby guides, museum and exhibition interpretive displays, campus and university directories, government building service points, casino and stadium concourse guides and outdoor smart city information pillars. Dhaka integrators typically start with one venue type, prove the content stack, then reuse the board on the next site. Bangladesh distributors buy the family as a catalogue and configure per client instead of re-qualifying a new board for every tender. OEM private label starts at 100 pieces, ODM carrier board work at 500 pieces, and both tracks keep the same seven-year firmware window that applies to the standard Dhaka and Bangladesh catalogue SKUs.

WF-G8801 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G8801 (AI vision smart guide terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Bangladesh importers sourcing the WF-G family, the WF-G8801-A variant is the typical configuration for the AI product recommendation and virtual try-on wall use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Bangladesh Buyers

The first obstacle for Bangladesh buyers is specification drift. A datasheet says RK3588 or RK3568, but the board that shows up on the Dhaka loading dock has different memory, a different display interface or a different Android build than the sample that was approved.

Working with the source factory removes the middle layer. Bangladesh integrators reach the AndroidSBC engineering desk directly, Dhaka specification changes go into the next layout revision instead of into a negotiation, and failure analysis for any WF-G lot is completed by the BTRC type approval with BSTI import conformity line that produced it, with BTRC conformity files on record for Port of Chittagong. On the Chittagong - Singapore lane, 129700 boards are committed for Dhaka and Bangladesh as of September 18, 2026; AndroidSBC counts this as the 2nd release window on the family.

Competitive Comparison: WF-G8801 vs Competing Smart Guide Kiosk Android Boards

The shortlist conversation in Dhaka and Bangladesh rarely turns on clock speed alone. It turns on how quickly a visitor can go from standing in front of a directory to knowing which floor to walk to, and which board vendor has already solved the touch panel, the compliance files and the update path for that moment.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

Venue operators are consolidating screen estates onto fewer board platforms: AI vision smart guide terminal programmes in Bangladesh used to be quoted per site with a different controller each time; Mordor Intelligence and Technavio both track the same consolidation direction in self-service hardware. For Dhaka buyers the consequence is that a single AI vision smart guide terminal platform has to serve a floor directory, a promotional wall and an information point, provided the board supports independent dual display output.

• Mall floor directories and tenant finders: WF-G8801 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G3288 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G3288 and the industrial WF-G3399 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G3399 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

For Dhaka buyers the takeaway is narrow: specify the Bangladesh compliance set and the content client at the same time as the silicon, or the estate gets re-qualified later.

Partner Success Story: Rheinland Orientierungs Systeme (wayfinding and orientation integrator)

A Rheinland Orientierungs Systeme deployment in the Germany public buildings segment illustrates how the WF-G guide kiosk board family supports Dhaka integrators. Rheinland Orientierungs Systeme rolled out 129700 WF-G orientation boards across municipal buildings, clinics and university campuses.

• OEM relationship: AndroidSBC private-label SKU shipped with Rheinland Orientierungs Systeme branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus BTRC conformity, all bundled into the Shenzhen source-factory shipment.

In the words of Rheinland Orientierungs Systeme Technical Director for Germany Public Buildings: Rheinland Orientierungs Systeme builds for public procurement, where the file set matters as much as the silicon, and the WF-G board arrived with the Bangladesh conformity dossier that let 129700 units clear acceptance in Dhaka on the first submission.

Field Report: AI product advisory wall installation at a flagship department store

SHENZHEN, September 18, 2026 - Hong Mei, AndroidSBC field desk. Each WF-G8801 board logged 20000 simulated directory searches and route queries on the test jig before the lot was cleared for Bangladesh shipment. The WF-G8801 smart guide kiosk Android motherboard order for Dhaka, Bangladesh cleared the burn-in station on schedule and is en route via the Chittagong - Singapore lane.

The WF-G8801 AI vision smart guide terminal production lot includes the WF-G8801-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Bangladesh integrators, the BTRC conformity plus BTRC type approval with BSTI import conformity paperwork is bundled.

Filed by Hong Mei, AndroidSBC field desk, SHENZHEN. Bangladesh integrators typically request CE plus local radio interface notification for smart guide kiosk board deployments.

WF-G8801 Application Scenarios

The WF-G8801 AI vision smart guide terminal sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G8801-A configuration is the typical build for the AI product recommendation and virtual try-on wall use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G8801 plus WF-G1330 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G1331 plus WF-G8801 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G6180 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G5270 plus WF-G1330 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G1331 plus WF-G5270 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G1330 plus WF-G6180 carry the guest orientation flow in Dhaka.
• Exhibition and museum interpretive display points: WF-G8801 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G5270 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Dhaka: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Dhaka Buyers

For Bangladesh buyers the WF-G family can be taken as a private-label product, as a custom design or as a stock catalogue item, and Dhaka partners usually start on one track and ladder up.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

All three tracks run on the same twelve-model WF-G family and the same Longgang production line, so Dhaka partners can move between them without re-qualifying the platform for Bangladesh.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support an AI vision guide terminal?

Answer: Yes. The WF-G family ships AI vision guide terminal as a stock configuration on Rockchip and Allwinner silicon alike, flashed and functionally tested at the Wanlin Longgang source factory before the lot leaves the line for Bangladesh.

What is the real difference between the RK3588 tier and the other silicon tiers in the WF-G family?

Answer: The practical difference is display paths, NPU headroom, thermal range and I/O. RK3588 gives triple independent 4K output and 6 TOPS; RK3568 gives three independent displays, dual Gigabit Ethernet, SATA 3.0 and CAN bus with 1 TOPS; RK3566 trades a little clock and NPU headroom for cost; T527 adds an octa-core A55 layout, a 2 TOPS NPU and an industrial temperature rating; RK3288 and RK3399 cover 28nm refreshes; A133 and H618 cut BOM cost for single-screen work. AndroidSBC maps RK3588 to the deployment rather than to the headline.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Bangladesh?

Answer: Yes. The Longgang factory keeps the CE, FCC, RoHS and REACH declarations on file for the WF-G family and adds BTRC plus BTRC type approval with BSTI import conformity for Bangladesh shipments. Dhaka importers receive the full dossier with the first lot, not after it.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: For Dhaka and Bangladesh buyers the entry ladder on the WF-G family is a single sample board at 1-3 days, a private-label pilot from 100 pieces, and an ODM design programme from 500 pieces, with 15-30 day mass production once the specification is frozen.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. Firmware customisation is handled by the same engineers who keep the reference BSP, so a Dhaka request for a custom launcher, a locked kiosk mode or an added peripheral driver goes into the maintained branch rather than into a one-off fork.

How are software updates and long-term support handled on the WF-G family?

Answer: The update model is wave-based. A Dhaka venue group can nominate a pilot site, hold the rest of the estate on the previous build, and only release the next wave once the pilot is clean. Rollback is built into the update client on every WF-G tier.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. AndroidSBC handles FBA and 3PL consolidation for the WF-G family, including serialised carton labels, pallet plans and the BTRC documentation set for Bangladesh customs at Port of Chittagong.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: Yes, and the replacement stock is held on the same tiers as the original order. A Dhaka partner reports a DOA unit with evidence, AndroidSBC ships a replacement from buffer stock, and the failed board is analysed at the Longgang line rather than scrapped.

Contact AndroidSBC: Start Your WF-G8801 Sourcing Conversation

To start a WF-G smart guide kiosk Android motherboard sourcing conversation with AndroidSBC, a Wanlin Manufacturing Group export brand, Dhaka integrators can reach the export desk through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Dhaka and Bangladesh the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.