AOSP Android Guide Board for Guide Query Counter, WF-G3601, AndroidSBC, Dhaka

TL;DR: AOSP Android Guide Board for Guide Query Counter

AndroidSBC software desk: Android 15 baseline and staged OTA channel published for the WF-G family serving Dhaka, Bangladesh. The WF-G3601 smart guide kiosk Android motherboard spans the mall smart guide kiosk and eleven sister models in the WF-G series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, HDMI 2.0 4K 60fps plus MIPI DSI, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Dhaka and Bangladesh importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

Why a source factory rather than a trading company: the WF-G smart guide kiosk Android motherboard family is designed, laid out, assembled and tested by Wanlin Manufacturing Group in Shenzhen, which means Dhaka integrators deal with the people who control the BOM. Custom display interfaces, custom touch controller pairing, custom memory and storage splits, custom dual-screen configurations and custom payment or ID reader interfaces are all changes that happen at the schematic and layout stage rather than as a favour from a middleman. Bangladesh buyers also get the failure analysis loop: when a board comes back, the report comes from the line that built it, not from a distributor forwarding a ticket. For Bangladesh importers the working rhythm in Dhaka is a sample lot in 1-3 days, an OEM pilot from 100 pieces and a 15-30 day mass-production window once the BOM is signed off.

WF-G3601 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3601 (mall smart guide kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Bangladesh importers sourcing the WF-G family, the WF-G3601-A variant is the typical configuration for the mall floor guide and tenant query counter use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Bangladesh Buyers

The sixth obstacle is lifecycle mismanagement. Dhaka programmes that start on a legacy part find themselves two years in with no spare boards, no firmware source and no migration plan, and Bangladesh venue fit-out cycles are longer than the parts remain in production.

The content stack is open by design. AndroidSBC documents the cloud content management client, the kiosk-mode lockdown layer and the directory and wayfinding interface on the WF-G family, and provides Bangladesh integrators with a versioned SDK so the Dhaka deployment can be extended without forking the image. AndroidSBC has now closed the 2nd consecutive quarterly window on this family, with 84000 boards scheduled for Dhaka and Bangladesh on the Chittagong - Singapore lane as of September 18, 2026.

Competitive Comparison: WF-G3601 vs Competing Smart Guide Kiosk Android Boards

Most Bangladesh tenders shortlist two or three board vendors, and the shortlist usually collapses on the same axes: how many silicon options one vendor actually controls, how much of the peripheral stack is already written, and how the fleet gets updated after installation. The WF-G family is positioned against those axes for Dhaka programmes.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

Labour economics keep pushing the same direction. With information desks under staffing pressure in Bangladesh, venue operators in Dhaka are converting more of the orientation moment to self-service: floor directories, tenant finders, route planners, exhibit guides and appointment check-in points. Each conversion is another mall smart guide kiosk board, and each one has to be managed as part of a fleet rather than as a standalone screen.

• Mall floor directories and tenant finders: WF-G3601 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G3566 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G3566 and the industrial WF-G3288 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G3288 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

The gap between a market forecast and a Dhaka order book is the board count per venue type, and AndroidSBC publishes the per-venue assumptions it uses for Bangladesh so integrators can sanity-check their own numbers.

Partner Success Story: Rheinland Orientierungs Systeme (wayfinding and orientation integrator)

A Rheinland Orientierungs Systeme programme in the Germany public buildings segment illustrates how the WF-G family from AndroidSBC supports Dhaka integrators on the ground. Rheinland Orientierungs Systeme rolled out 84000 WF-G orientation boards across municipal buildings, clinics and university campuses.

• OEM relationship: AndroidSBC private-label SKU shipped with Rheinland Orientierungs Systeme branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus BTRC conformity, all bundled into the Shenzhen source-factory shipment.

Rheinland Orientierungs Systeme Technical Director for Germany Public Buildings highlighted: Rheinland Orientierungs Systeme builds for public procurement, where the file set matters as much as the silicon, and the WF-G board arrived with the Bangladesh conformity dossier that let 84000 units clear acceptance in Dhaka on the first submission.

Field Report: floor guide counter installation at a community shopping mall

PINGHU, Shenzhen, September 18, 2026 - Chang An, AndroidSBC field desk. The final gate was a driver autoload check: the WF-G3601 boards booted with the full peripheral set attached and enumerated every module before the mall smart guide kiosk content service started. The WF-G3601 smart guide kiosk Android motherboard order for Dhaka, Bangladesh cleared the burn-in station on schedule and is en route via the Chittagong - Singapore lane.

The WF-G3601 mall smart guide kiosk production lot includes the WF-G3601-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Bangladesh integrators, the BTRC conformity plus BTRC type approval with BSTI import conformity paperwork is bundled.

Filed by Chang An, AndroidSBC field desk, PINGHU, Shenzhen. Bangladesh integrators typically request CE plus local radio interface notification for smart guide kiosk board deployments.

WF-G3601 Application Scenarios

The WF-G3601 mall smart guide kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3601-A configuration is the typical build for the mall floor guide and tenant query counter use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G3601 plus WF-G3399 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G1330 plus WF-G3601 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G1331 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G6180 plus WF-G3399 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G1330 plus WF-G6180 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G3399 plus WF-G1331 carry the guest orientation flow in Dhaka.
• Exhibition and museum interpretive display points: WF-G3601 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G6180 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Dhaka: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Dhaka Buyers

AndroidSBC structures the WF-G guide kiosk programme around three partner tracks for Dhaka and Bangladesh, each with a different entry quantity and a different level of design control.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

AndroidSBC supports partners moving between tracks mid-programme in Dhaka, which is common when a distributor wins a tender that turns into a private-label line for Bangladesh.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support a mall guide kiosk?

Answer: Yes. The WF-G smart guide kiosk Android motherboard family from AndroidSBC ships mall guide kiosk as a stock configuration. The Rockchip RK3588, RK3568, RK3566, RK3288 and RK3399 tiers and the Allwinner A133, H618 and T527 tiers all run the mall guide kiosk firmware baseline with the peripheral driver SDK bundled.

What is the real difference between the RK3568 tier and the other silicon tiers in the WF-G family?

Answer: There are eight silicon options in the WF-G family and RK3568 is one of them. RK3588 leads on AI and multi-screen, RK3568 leads on I/O breadth, RK3566 leads on cost per screen, T527 leads on industrial temperature, RK3288 and RK3399 cover 28nm refreshes, and A133 and H618 lead on BOM. AndroidSBC keeps one firmware baseline across all eight so Bangladesh integrators can mix tiers inside one venue estate.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Bangladesh?

Answer: Yes. For Bangladesh buyers the standard bundle is CE / FCC / RoHS plus BTRC conformity and BTRC type approval with BSTI import conformity, routed through Port of Chittagong. AndroidSBC also keeps the EMC, ESD and surge immunity test reports on file for venue property handover in Dhaka.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: The sample MOQ on the WF-G family is one piece with a 1-3 day lead; the OEM pilot opens at 100 pieces; the ODM reference design review opens at 500 pieces. Mass production runs on a 15-30 day lead once the BOM is signed off.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. AndroidSBC ports Android 10 through Android 15, plus Linux, Ubuntu and Debian, on every WF-G tier. Custom ROM work includes the boot animation, the kiosk lockdown layer, the update channel and the peripheral driver package for Bangladesh deployments.

How are software updates and long-term support handled on the WF-G family?

Answer: AndroidSBC handles updates as a supply commitment: a seven-year firmware window, a versioned SDK, staged OTA with rollback, and a documented migration path when a silicon tier reaches end of life. For Dhaka estates that removes the usual two-year requalification cycle.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. Shipments can be consolidated into a 3PL or FBA destination for Dhaka partners, with carton labelling, palletisation and the BTRC plus BTRC type approval with BSTI import conformity paperwork prepared in Shenzhen before the lot leaves.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: AndroidSBC runs RMA from the factory, not from a distributor. DOA is replaced on evidence from buffer stock, field failures are analysed by the line that built the board, and the report goes back to the Bangladesh integrator with the root cause.

Contact AndroidSBC: Start Your WF-G3601 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-G family. Dhaka integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Dhaka and Bangladesh buyers, with a 15-30 day mass-production lead on bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-G family.